Monitor Teltonika · OpenWrt with an agent that reports to one console.

RutOS on RUTX and similar ARM routers, OpenWrt 21+. Cellular signal, operator, SIM and data counters in every heartbeat. Survives sysupgrade. BE AI investigates when something fails; a person approves the fix.

install

One line, from the company's install page.

Run in the router's shell. It fetches the signed binary, verifies the checksum, installs the service and connects. Run it again any time; it never overwrites the machine's identity.

wget -O - https://hub.[yourdomain]/install/inst_…/openwrt.sh | sh

Outbound 443 to the hub only. No inbound rule, no VPN, no SNMP community.

what the agent watches on Teltonika · OpenWrtCellularRSSI, RSRP, RSRQ, SINR, operator, network type, SIM state, bands, temperature and byte counters, from the router's own API.procd servicesEnabled services that are not running, restart proposed and approved.Loglogread on demand, capped.ReachabilityPing the carrier gateway, the VPN peer, head office.Survives sysupgradePaths are added to the upgrade keep-list; the service comes back on its own.Not for 16 MB flashRUT2xx and RUT9xx do not have room for the 6 MB binary; RUTX and larger do.

A Teltonika RUTX11 in the console: LTE, signal strength, operator, WAN failover state, LAN and external address — A RUTX11 as the console sees it: LTE signal, operator, WAN and failover, plus the same CPU, disk and ping facts as everything else.

questions

Before you put it on Teltonika.

Which models?

Verified on a Teltonika RUTX11 running RutOS 7.22. Other RUTX and TRB models on ARMv7 should work, and OpenWrt 21 and later on ARMv7. RUT2xx and RUT9xx have too little flash for the binary.

Does it need the carrier to allow inbound?

No. One outbound HTTPS connection, which is what a 4G SIM with a private address can do.

Ten machines, 14 days, no card. Uninstall the agent and you are out.

Start a free trial See pricing